Short answer: Small drywall (gypsum board) holes up to about 1 cm can be filled with jointing compound or wall putty, sanded and painted. Medium holes up to about 10–15 cm need a mesh patch or a self-adhesive repair patch under the compound. Larger holes need the damaged section cut out and replaced with a new piece of board fixed to a backing strip. Most small repairs cost a few hundred rupees in materials and an afternoon of work.
Last updated: 13 October 2026.
Gypsum board partitions and false ceilings are now common in Indian flats, offices and rented homes. They are quick to install but dent and puncture easily: a door handle swings too hard, a wall plug pulls out, or a TV mount is moved. This guide shows how to repair holes of every size, what it costs, when to call a professional, and how to handle the money side if you are a tenant or planning a bigger renovation.
First, check what kind of wall you have
Tap the wall. Gypsum board sounds hollow and you may see metal or wooden framing behind a hole. A brick or block wall with cement plaster sounds solid. The methods below are for gypsum board; for plastered brick walls, small holes are filled with cement-based putty or a patching mortar, and larger damage is re-plastered.
Before cutting into any wall, switch off power to that area and check for wiring or plumbing behind it. Electrical conduits often run vertically from switches and sockets.
Tools and materials
| Item | Used for | Indicative cost* |
|---|---|---|
| Gypsum jointing compound or ready-mix wall putty | Filling and finishing | ₹150–₹400 per small pack |
| Fibreglass mesh tape or self-adhesive repair patch | Bridging medium holes | ₹100–₹300 |
| Putty knives (50 mm and 150 mm) | Applying compound | ₹100–₹250 |
| Sandpaper (120 and 180 grit) or sanding block | Smoothing | ₹50–₹150 |
| Gypsum board offcut, wooden batten, drywall screws | Large hole repair | ₹300–₹800 |
| Utility knife or keyhole saw | Cutting board | ₹150–₹400 |
| Primer and matching paint | Final finish | ₹300–₹1,000 depending on quantity |
*Indicative ranges for small quantities in Indian cities in 2026; local prices vary. Where possible, buy gypsum board and paints that carry the relevant Bureau of Indian Standards certification marks.
How to repair small holes (nail and screw holes)
- Scrape away loose paper and crumbs around the hole with a putty knife.
- Press a little compound or putty into the hole and draw the knife across so it is flush.
- Let it dry (usually a few hours; check the pack).
- Sand lightly with 180-grit paper, wipe off dust, and apply a second thin coat if it has shrunk.
- Spot-prime and paint.
How to repair medium holes (up to about 10–15 cm)
- Trim ragged edges so the hole is clean.
- Stick a self-adhesive metal-mesh patch over the hole, or criss-cross fibreglass mesh tape over it, extending a few centimetres past the edges.
- Spread a thin first coat of jointing compound over the patch with a 150 mm knife, feathering the edges outward.
- When dry, apply a second, wider coat. Then a third if needed. Thin coats dry faster and crack less than one thick coat.
- Sand smooth, wipe, prime and paint the whole panel or up to a natural break such as a corner, so the patch does not show.
How to repair large holes
- Draw a neat rectangle around the damage and cut along the lines with a utility knife or keyhole saw.
- Fix two wooden battens inside the opening, screwed into the existing board above and below, to act as backing.
- Cut a new piece of gypsum board of the same thickness to fit the opening and screw it to the battens, with screw heads just below the surface.
- Cover the joints with mesh tape and apply three thin coats of jointing compound, sanding between coats.
- Prime the patch before painting; fresh compound absorbs paint differently and will show through otherwise.
If the hole is near a corner bead, a ceiling joint or a door frame, or if the framing behind is bent, a carpenter or false-ceiling contractor will usually do a cleaner job.
Common mistakes to avoid
- Applying one thick coat instead of several thin ones, which leads to cracks and long drying times.
- Skipping primer, which leaves a dull “flashing” patch visible under paint.
- Over-sanding and tearing the board’s paper face.
- Using cement-based putty on gypsum board; it does not bond as well and can crack.
- Ignoring the cause: fit a door stopper or wall guard where handles hit the wall.
What it costs: DIY vs hiring someone
| Job | DIY materials (indicative) | Hired help (indicative) |
|---|---|---|
| Three or four nail holes | ₹200–₹400 | Often bundled with painting work |
| One doorknob-sized hole | ₹400–₹800 | ₹800–₹2,000 including visit |
| Large patch with new board | ₹800–₹1,500 | ₹1,500–₹4,000 |
| Repainting the full wall afterwards | ₹800–₹2,500 | ₹2,500–₹6,000 depending on area |
Ask for a written quote that lists materials, labour and whether repainting is included. If a contractor takes an advance and does not complete the work, or the work is clearly defective, you can register a complaint through the National Consumer Helpline (toll-free 1915).
The money side: tenants, insurance and budgeting
If you rent
Many rental agreements let the landlord deduct repair costs from the security deposit for damage beyond normal wear and tear. Repairing small holes neatly before you move out, and photographing the walls when you move in, can protect your deposit. Our article on the advantages of renting covers other tenant tips.
Does home insurance cover it?
Home insurance generally covers sudden damage from insured events such as fire or certain natural disasters, not everyday wear and tear or accidental dents. Read your policy wording; our insurance hub explains the basics, and making your home earthquake ready covers bigger structural risks.
Budgeting for repairs
Small repairs add up. Setting aside a fixed amount every month for home upkeep avoids last-minute borrowing; our simple savings calculator shows how quickly a small monthly amount builds. For a larger renovation, compare paying from savings with options such as a home renovation loan, and only borrow if the EMI fits comfortably in your budget.
Planning a bigger renovation? Compare home improvement financing from RBI-regulated lenders before you commit.
Finishing touches
Once the patch is painted, step back and look at the wall in daylight and at night under lamps; side light reveals ridges. A final skim and repaint of the whole wall gives the most invisible result. If you are repainting anyway, our guide on choosing the right paint colour may help, and if the wall is a shared partition, consider soundproofing while it is open.
Frequently asked questions
Can I use wall putty instead of jointing compound on gypsum board?
For tiny holes, a good acrylic or gypsum-based putty works. For patches and joints, gypsum jointing compound with mesh tape gives a stronger, crack-resistant finish.
How long does drywall compound take to dry?
Thin coats often dry in a few hours, thicker ones may need a day, depending on humidity. Follow the pack instructions and let each coat dry fully before sanding.
Can I hang something on a repaired patch?
Light items, yes, with suitable gypsum board anchors. For TVs or shelves, fix into the metal or wooden framing behind the board, not the patch.
Do I need to repaint the whole wall?
Not always, but touch-up paint rarely matches perfectly, especially on older paint. Repainting to the nearest corner gives the most even look.
Will my landlord deduct the repair from my deposit?
It depends on your rental agreement and the extent of damage. Neat repairs before moving out and move-in photos help avoid disputes.
Sources
Disclosure: FundsTiger (Gatimaan Finance Advisors Pvt. Ltd.) is a loan marketplace and lending service provider for RBI-regulated lenders. Aparampaar Finance Pvt. Ltd. (Omozing), one of those lenders, is a related party of FundsTiger. This article is general information, not financial advice. Read your loan agreement and KFS before you decide.